--------------------------------------------Nova Star Tech-------------------------------
Notice:

1.The display configuration function of SmartLCT V3.1, support for sending card:MCTRL300,MCTRLR5,MCTRL660,3D HD,MCTRL600,VX2,VX4,VX4S,ProHD.

2.The V-Sender module of SmartLCT V3.1, support for sending card:MCTRL300,MCTRL660,MCTRL3D HD.
  Support Pro HD which program version is greater than V4.5.1.
  Support VX4S which program version is greater than V1.5.
  Does not support other sending cards.

3.SmartLCT V3.1 does not support display offset adjustment in case that MCTRL4K features mulit-card.

4.The .rcfgx file SmartLCT V3.0 supported is exported or converted by later than NovaLCT-Mars V4.6.

5.On the MAC,Please you use a cable or USB to connect sending card, not support serial port.

6.On the MAC, If you use a cable directly connected to sending card, please set the IP address and gateway into the same.
  
7.Rotation function of MCTRLR5 sending device enables any-central-point rotation for the single cabinet having been divided into groups.

8.Thank you very much for using the SmartLCT.You could send email to the support@novastar.tech if you have any suggestion or questionwe will reply as soon as possible
